Welcome To our shop !

0
0

Tooling and Accessories

Showing 209–224 of 300 results

Rushmore USA 1/8″ Solid Carbide 3XD AlTiN Drill, Non-Coolant
$9.56 $11.95
Rushmore USA 15/64″ Solid Carbide 3XD AlTiN Drill, Non-Coolant
$23.96 $29.95
Rushmore USA 3 Flute 5 Centerline Angle Solid Carbide Ball End Tapered End Mill, 1/8″ Small End Diameter, 1-1/2″ Length of Cut, 3/8″ Shank Diameter, 3-1/2″ Overall Length
$49.98 $99.95
Rushmore USA 4 Flute H.S.S. Standard Plug Hand Tap, 1/4″-28 Tap Size, .255″ Shank Diameter, H3 Thread Limit, 2.5″ Overall Length
$15.96 $19.95
Rushmore USA 5 Flute Solid Carbide Variable Flute nACo Coated Single End Mill, 3/8″ Size & Shank Diameter, 1″ Length of Cut, 2-1/2″ Overall Length, .020″ Corner Radius
$10.06 $12.58
Rushmore USA 9/64″ Solid Carbide 3XD AlTiN Drill, Non-Coolant
$15.96 $19.95
Rushmore USA H.S.S. 3 Flute Spiral Pointed Plug Tap, H3, Thread Size 3/8″-16
$84.98 $169.95
Rushmore USA Solid Carbide AlTiN 3XD Non-Coolant Thru Drill, 23/64″ Size, 0.3594″ Decimal Size, 0.3937″ Shank Diameter, 1.85″ Flute Length, 3.5″ Overall Length
$35.96 $44.95
Rushmore USA Solid Carbide AlTiN 5XD Coolant Thru Jobbers Drill, 1/2″ Size, 0.5″ Decimal Size, 0.5512″ Shank Diameter, 3.031″ Flute Length, 4.88″ Overall Length
$100.00 $599.95
Rushmore USA Solid Carbide AlTiN 5XD Coolant Thru Jobbers Drill, 15/64″ Size, 0.2344″ Decimal Size, 0.2362″ Shank Diameter, 1.732″ Flute Length, 3.22″ Overall Length
$54.98 $109.95
SCM Tension & Compression BT Shank, 40BT, Size 1
$26.36 $32.95
SCM Weler Chuck 32mm Reduction Sleeve (Metric) #15088A, 25mm Inside Diameter
$49.98 $99.95
Sharktools 1/2″ CAT 40 Taper End Mill Holder, 2.5″ Projection
$49.98 $99.95
Sharktools 3/8″ CAT 40 Taper End Mill Holder, 3″ Projection
$39.98 $79.95
Sharktools ER-32 Spring Collet, 1/8″ Size, .125″
$18.36 $22.95
Sloky HD Single Set TORX Size TX6
$49.98 $99.95